Powerful output, proven technology – the Senvion 6.3M152.

The Senvion 6.3M152 continues the evolution of our proven 6 MW offshore series. It combines all of Senvion’s hallmark features – outstanding availability, excellent grid compatibility, ease of transport and a maintenance-friendly design – with highly efficient blades, based on the latest Rodpack technology. The optimised gearbox, rotor and mainframe of its precursor – the 6.2M152 – already enabled an increase in AEP of up to 20 percent. With a further increase in power density and energy yield efficiency, the 6.3M152 can provide a competitive advantage in offshore energy generation and offers a range of hub heights to meet individual project requirements.

    • Nominal power: 6,330 kW
    • Rotor diameter: 152 m
    • Hub height: Project specific
        • Wind class: High Wind (IEC S)
        • Operating temperature range: -20 – +30 °C
        • Rotor surface: 18,146 m²

          Technical data 6.3M152

          Design data

          Nominal power6,330 kW
          Cut-in wind speed3.5 m/s
          Nominal wind speed11.5 m/s
          Cut-out wind speed30 m/s
          Restart cut-in wind speed25 m/s
          Operating temperature range-20 – +30 °C


            Hub heightWind classDIBt Wind zone
            Project specificIEC SWZ 4


              Diameter152 m
              Rotor area18,146 m²
              Rotor speed6.4 – 10.1 1/min (+15 %)
              Power controlElectrical pitch

                Rotor blade

                Blade length74.4 m
                TypeGlass fiber-reinforced plastic (GFRP)
                Max. chord width4.5 m

                  Electrical system

                  Nominal frequency50 Hz
                  GeneratorDouble-fed-induction generator
                  Generator protection classIP 54
                  Converter typeFrequency converter

                    Sound power level

                    Maximum sound power level109 db (A)

                      Power curve

                      Senvion Technology

                      The heart of our wind turbines is the drive train. Our successful modular technology concept is based on a powerful gear system which enables the use of an efficient, high-speed generator even at low rotor speeds. The perfect interaction of rotor, planetary/spur gear and generator ensures maximum power yield. The efficient electrical system, improved cooling and cast resin dry type transformer ensure that the 6.XM turbines continuously feed their rated output into the grid.

                      1. 1

                        Generator/frequency converter

                        • Variable speed range for optimum yields
                        • Fully encapsulated generator with waterair-heat exchanger
                        • Low losses and high efficiency, as only 20 per cent of the total output has to be operated via converter
                        • Partially redundant converter system:
                          reduced operation with up to 66 per cent of
                          rated power output if one converter fails
                        • Frame design minimises oscillation and vibration

                      2. 2

                        Gear system

                        • Three-stage combined planetary/spur gear (2 planets, 1 spur wheel)
                        • Satisfies stringent demands in terms of service life and operating smoothness in line with Senvion gear specifications
                        • Optimised efficiency
                        • Improved structure-borne sound insulation
                        • Low temperature thanks to efficient oil cooling system using an oil-air-heat exchanger
                        • Three-stage oil filter system for excellent oil quality
                        • Integrated oil particle counter

                      3. 3


                        • Environment friendly cast resin dry type transformer
                        • Reduced mass and minimal fire risk
                        • Fully encapsulated assembly with air-air-heat exchanger
                        • Choice of nominal output voltage (20, 30 and 33 kV)

                      4. 4

                        Rotor blade

                        • Load-optimised, lightweight GRP construction
                        • Excellent lightning protection with multi-receptor system

                      5. 5

                        Pitch system

                        • Virtually maintenance free electrical system
                        • High-quality, large blade bearing with permanent track lubrication and external gearing
                        • Maximum reliability through redundant blade angle detection with two independentmeasuring systems
                        • High safety through independent drive and control systems for each rotor blade
                        • Permanent charge and status monitoring of the battery boxes

                      6. 6


                        • Four-point contact bearing with external gearing, powered by top quality highperformance gear motors
                        • Holding brakes, with hydraulic pressure accumulator for fail-safe function, relieve drive systems when inoperative and stabilise the nacelle
                        • Minimum stress on the drive trains thanks to low friction of four-point bearing

                      7. 7

                        Rotor bearing and shaft

                        • Two main bearings, detachable from the main frame
                        • CARB™ bearing and high-quality fixed spherical roller bearing with perfectly fitted bearing housing and automatic permanent lubrication for maximum service life
                        • Rotor shaft cast in alignment with transfer of torque

                      8. 8

                        Nacelle crane

                        • Hydraulic marine deck crane
                        • Capable of conducting virtually all maintenance work
                        • Long reach and high load capacity
                        • Remote control enables flexible deployment options

                      9. 9

                        Lightning protection

                        • Internal and external lightning protection zone concept in compliance with the requirements of lightning protection class I according to IEC standard and GL guidelines
                        • Reliable protection of bearings via defined lightning paths
                        • GRP coupler for galvanic isolation of generator system from gearbox

                      10. 10

                        Tubular tower

                        • Natural frequency of tower higher than rotational speed of rotor (rigid design) ensures minimum stress on tower and nacelle
                        • No speed restrictions, as no frequency interference
                        • Maximum component safety and stressoptimised door opening

                      11. 11

                        Fire protection

                        • Fully automated system with active smoke and aerosol detectors in nacelle, switch cabinets and transformer room
                        • Automatic nitrogen multi-zone extinguishing system for electrical components
                        • CO2 and ABC fire extinguishers for manual firefighting in tower and nacelle

                      Title File Size
                      Technical overview 6.3M152 PDF 149 kB
                      Senvion - Portfolio Overview PDF 1.6 MB

                      Please contact the relevant company within the Senvion Group to check the availability of a given product in your country.

                      Contact us

                      Senvion Sales Offshore
                      Überseering 10
                      22297 Hamburg