One of the most frequently produced turbine

With a rotor surface of 5,281 m2, this 2.05 megawatt wind turbine generates consistently good energy yields in high wind locations. It is based on the technology of the MM70, which was launched in 2002 and is meanwhile one of the most frequently produced types of wind turbine in the world. Hub heights ranging from 59 to 80 meters make the MM82 the ideal choice for sites with height restrictions.

  • Nominal power: 2,050 kW
  • Rotor diameter: 82 m
  • Hub height: 59 – 80 m

  • Wind class: High Wind
  • Operating temperature range: -20 – +35 °C
  • Rotor surface: 5,281 m²

Senvion Technology

The MM series is equipped with with a doubly fed induction generator, frequency converter and DC pitch system and and has proven its reliability for years. The heart of our wind turbines is the integrated drive train concept, where all the different components – rotor blade, planetary/spur gear, generator, converter and transformer – work in perfect harmony. This ideal interaction of the individual components delivers a high energy yield and also keeps noise emission low.

  1. 1

    Generator/frequency converter

    • Variable speed range for optimum yields
    • Fully encapsulated generator with air-air heat exchanger
    • Optimum temperature inside generator, even at high ambient temperatures

  2. 2

    Gear system

    • Planetary/spur gear
    • Satisfies stringent demands in terms of service life and operating smoothness in line with Senvion gear specifications
    • Low temperature thanks to efficient oil cooling system
    • Three-stage oil filter system for excellent oil quality

  3. 3

    Rotor blade

    • Individual blade profiles for optimal aerodynamics of the rotor
    • Robust aerodynamic design guarantees best possible performance, even in difficult wind conditions or when dirty
    • Proven quality, tested statically and dynamically in accordance with IEC specifications
    • Fully integrated lightning protection in accordance with IEC protection class I

  4. 4

    Rotor hub

    • Dimensionally stable thanks to compact design and alignment with transfer of torque
    • Optimum integration of pitch drive systems
    • Generously proportioned spinner ensures safe access to hub in all weathers

  5. 5

    Pitch system

    • Virtually maintenance free electrical system
    • High-quality, large blade bearing with permanent track lubrication and external gearing
    • Integrated deflector in the spinner as protection from the elements
    • Maximum reliability through redundant blade angle detection with two independent measuring systems
    • Fail-safe design with independent drive and control systems for each rotor blade

  6. 6

    Rotor bearing and shaft

    • High quality spherical roller bearing with bearing with perfectly fitted bearing housing and permanent lubrication for maximum service life
    • Q&T steel rotor shaft cast in alignment with transfer of torque

  7. 7


    • Four-point contact bearing with external gearing, powered by top quality high-performance gear motors
    • Holding brakes with hydraulic pressure accumulator for fail-safe function relieve drive systems when inoperative and stabilise nacelle
    • Minimum stress on the drive trains thanks to low friction of four-point bearing and brake release during wind tracking

  8. 8

    Holding brake

    • Generously dimensioned disc brakes hold rotor safely
    • Soft brake function for minimum wear of gearbox

  9. 9

    Tubular steel towers

    • Natural frequency of tower higher than rotational speed of rotor (rigid design) ensures minimum stress on tower and nacelle
    • No speed restrictions, as no frequency interference
    • Maximum component safety thanks to L-shaped flange and stress-optimised door opening

Technical data MM82

Design data

Nominal power 2,050 kW (50 Hz) 2,050 kW (60 Hz)
Cut-in wind speed 3.5 m/s
Nominal wind speed 14.5 m/s
Cut-out wind speed 25 m/s
Restart cut-in wind speed 22 m/s
Operating temperature range -20 – +35 °C (50 Hz) -30 – +35 °C (60 Hz)
Operating temperature range optional -20 – +40 °C


Hub height Wind class DIBt Wind zone
58.5 – 59 m IEC IA WZ 4, GK I
68 – 69 m IEC IA -
78 – 80 m IEC S (based on IEC IA) -
58.5 – 80 m IEC S (based on IEC IA) -


Diameter 82 m
Rotor area 5,281 m²
Rotor speed 8.5 – 17.1 1/min (+12.5 %)
Power control Electrical pitch

Rotor blade

Blade length 40 m
Type Glass fiber-reinforced plastic (GFRP)
Max. chord width 3.3 m

Electrical system

Nominal power 2,050 kW (50 Hz) 2,050 kW (60 Hz)
Nominal voltage 690 V (50 Hz)/575 V (60 Hz)
Nominal frequency 50 Hz/60 Hz
Generator Asynchronous double-fed generator
Generator protection class IP 54
Converter type Frequency converter for double-fed induction generator
Transformer ETS (Oil transformer) ITS (Cast resin transformer)

Sound power level

Maximum sound power level 104 db (A)

Power curve

Please contact the relevant company within the Senvion Group to check the availability of a given product in your country.


Title File Size
Technical overview MM82 PDF 218 kB
Senvion - MM series PDF 2.1 MB
Senvion - Portfolio Overview PDF 2.1 MB

References & Case Studies

Contact us

Senvion Sales

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99