2.3M124 – Capture more energy.

Depending on site-specific requirements the 2.3M124 with its 124 m rotor diameter can be a highly efficient, powerful alternative for low-wind-speed sites. It ideally complements the 2.3M120 model in the low wind-speed segment with both models delivering reliable and cost-efficient yields.


Highlights

  • Nominal power 2,330 kW, rotor surface 12,076 m², rotor diameter 120 m, hub heights 90 to 120 m
  • Load-flow optimised mechanical construction with time-proven components for a 20-year operating life
  • Internal Supply Unit: Supplies the turbine with constant voltage and frequency when disconnected from grid
  • Efficient cooling circuit: Combines the cooling circuit of the mechanical and electrical drive with that of the power electronics for higher efficiency
  • High capacity factor for higher returns

    Design data

    Nominal power 2,330 kW (LV-side) (50 Hz) 2,330 kW (LV-side) (60 Hz)
    Cut-in wind speed 3 m/s
    Nominal wind speed 12 m/s
    Cut-out wind speed 18 m/s
    Restart cut-in wind speed 16 m/s
    Operating temperature range -10 – +40 °C

    Gear system

    Type Multi-stage planetary/spur gearbox
    Gear ratio i = approx. 138
    Type of suspension Three-point contact suspension

    Power curve

    Certification

    Hub height Wind class DIBt Wind zone
    90 – 120 m IEC IIIA, IEC S -

    Rotor

    Diameter 124 m
    Rotor area 12,076 m²
    Rotor speed 7.3 – 11.9 1/min (+12 %)
    Power control Electrical pitch

    Contact us

    Our teams will be happy to assist you. To make sure your request finds the right contact, please select a division first:

    Please use this fom for general requests.

    Senvion Headquarters

    Überseering 10
    22297 Hamburg

    Phone: +49 40 5 55 50 90-0
    Fax: +49 40 5 55 50 90-39 99
    info[at]senvion.com

    Senvion Headquarters

    Überseering 10
    22297 Hamburg

    Phone: +49 40 5 55 50 90-0
    Fax: +49 40 5 55 50 90-39 99
    offshore.sales[at]senvion.com

    Senvion Headquarters

    Überseering 10
    22297 Hamburg

    Phone: +49 40 5 55 50 90-0
    Fax: +49 40 5 55 50 90-39 99
    sales[at]senvion.com