3.2M114 CCV – one of the quietest wind turbines in its class

With the hub height of 93 meters, the Senvion 3.2M114 was designed for medium wind speeds. Thanks to the larger rotor surface and the optimised aerodynamics of the rotor blades, these turbines can deliver up to ten per cent higher yield than the 3.4M104. Because the hub height of 93 meters rise above natural obstacles, this turbine generates high yields even in difficult terrain. Alternatives such as the cold climate version mean these turbines can be used anywhere in the world, even in extreme climate conditions.


Design data

Nominal power 3,200 kW (LV-side) 3,170 kW (MV-side)
Cut-in wind speed 3 m/s
Nominal wind speed 12 m/s
Cut-out wind speed 22 m/s
Restart cut-in wind speed 19 m/s
Operating temperature range -30 – +35 °C

Gear system

Type Three-stage planetary / spur gearbox
Gear ratio i = approx. 99.5
Type of suspension Three-point contact suspension

Power curve

Certification

Hub height Wind class DIBt Wind zone
100 m IEC S (based on IEC IIA) -

Rotor

Diameter 114 m
Rotor area 10,207 m²
Rotor speed 6 – 12.1 1/min (+15 %)
Power control Electrical pitch

Contact us

Please select a department. We will forward your message to the right contact.

Please use this fom for general requests.

Senvion Headquarters

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
info[at]senvion.com

Senvion Headquarters

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
offshore.sales[at]senvion.com

Senvion Headquarters

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
sales[at]senvion.com

Senvion Service

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
service.sales[at]senvion.com

Senvion TechCenter

Albert-Betz-Straße 1
24783 Osterrönfeld

Phone: +49 43 31 1 31 39 - 00 0
Fax: +49 43 31 1 31 39 - 9 99
info-techcenter[at]senvion.com