6.2M126 – the powerhouse

With a rated power of 6.15 MW and a rotor diameter of 126 metres, the Senvion 6.2M126 is the advanced version of the successful previous 5M model.


Design data

Nominal power 6,150 kW (MV-side)
Cut-in wind speed 3.5 m/s
Nominal wind speed 14 m/s 13.5 m/s
Cut-out wind speed 25 m/s 30 m/s
Restart cut-in wind speed 20 m/s 25 m/s
Operating temperature range -20 – +35 °C

Gear system

Type Three-stage planetary / spur gearbox
Gear ratio i = approx. 97
Type of suspension Four-point contact suspension

Power curve

Certification

Hub height Wind class DIBt Wind zone
100 m IEC S (based on IEC IB) -
112 – 114 m IEC S (based on IEC IB) -
117 m - WZ 4, GK II
95 – 96.5 m* IEC S (based on IEC IB) -
  • * site-specific

Rotor

Diameter 126 m
Rotor area 12,469 m²
Rotor speed 7.7 – 12.1 1/min (+15 %)
Power control Electrical pitch

Contact us

Please select a department. We will forward your message to the right contact.

Please use this fom for general requests.

Senvion Headquarters

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
info[at]senvion.com

Senvion Headquarters

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
offshore.sales[at]senvion.com

Senvion Headquarters

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
sales[at]senvion.com

Senvion Service

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
service.sales[at]senvion.com

Senvion TechCenter

Albert-Betz-Straße 1
24783 Osterrönfeld

Phone: +49 43 31 1 31 39 - 00 0
Fax: +49 43 31 1 31 39 - 9 99
info-techcenter[at]senvion.com