MM82

The classic turbine for high wind speeds

With a rotor surface of 5,281 m2, this 2.05 megawatt wind turbine generates consistently good energy yields in high wind locations. It is based on the technology of the MM70, which was launched in 2002 and is meanwhile one of the most frequently produced types of wind turbine in the world. Hub heights ranging from 59 to 80 meters make the MM82 the ideal choice for sites with height restrictions.


Design data

Nominal power 2,050 kW (LV-side) (50 Hz) 2,050 kW (LV-side) (60 Hz)
Cut-in wind speed 3.5 m/s
Nominal wind speed 14.5 m/s
Cut-out wind speed 25 m/s
Restart cut-in wind speed 22 m/s
Operating temperature range -20 – +35 °C (50 Hz) -30 – +35 °C (60 Hz)
Operating temperature range optional -20 – +40 °C (50 Hz)

Gear system

Type Three-stage planetary / spur gearbox
Gear ratio i = approx. 106 (50 Hz)/i = approx. 84 (60 Hz)
Type of suspension Three-point contact suspension

Power curve

Certification

Hub height Wind class DIBt Wind zone
59 m IEC IA -
69 m IEC IA -
80 m IEC S (based on IEC IA) -

Rotor

Diameter 82 m
Rotor area 5,281 m²
Rotor speed 8.5 – 17.1 1/min (+12.5 %)
Power control Electrical pitch

Contact us

Please select a department. We will forward your message to the right contact.

Please use this fom for general requests.

Senvion Headquarters

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
info[at]senvion.com

Senvion Headquarters

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
offshore.sales[at]senvion.com

Senvion Headquarters

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
sales[at]senvion.com

Senvion Service

Überseering 10
22297 Hamburg

Phone: +49 40 5 55 50 90-0
Fax: +49 40 5 55 50 90-39 99
service.sales[at]senvion.com

Senvion TechCenter

Albert-Betz-Straße 1
24783 Osterrönfeld

Phone: +49 43 31 1 31 39 - 00 0
Fax: +49 43 31 1 31 39 - 9 99
info-techcenter[at]senvion.com