High yields at low wind speeds

The 2.3M130 finds its place in the 2MW class and generates high yields at low wind locations. Compared to the Senvion MM100, one of our best sold turbines in our portfolio, the new 2.3M130 increases the annual energy production up to 40%.

With the 69% larger rotor swept area, the optimized load management with advanced control features from our innovative 3.XM series and pure Senvion technology inside, the latest upgrade in the 2 MW class meets a wide range of site requirements, regulations and grid requirements. It can thus be used in a large number of locations.

An additional benefit: with an operating temperature range up to +45 °C, the 2.XM turbine can even be operated under extreme hot conditions.

With Smart Power Mode the nominal power of the 2.3M130 can be maximized to 2,500 kW.

  • Nominal power: 2,300 kW
  • Rotor diameter: 130 m
  • Hub height: project specific

  • Wind class: Low wind
  • Operating temperature range: up to +45 °C
  • Rotor surface: 13,273 m²
  • Smart Power Mode

    Increased nominal power to 2,500 kW
  • Location

    proven transportation concept of MM turbines
  • Senvion technology

    Evolutionary development from MM and 3.XM series

Technical data 2.3M130

Datos de diseños

Potencia nominal2 300 kW / 2 500 kW
Velocidad de conexión3 m/s
Velocidad de desconexión20 m/s
Rango de temperatura operativa estandar0 – 45 °C


    Altura del bujeClase de vientoZona de viento DIBt
    Project specificIEC S (based on IEC IIIB)-


      Diámetro130 m
      Superficie de barrido13 273 m²
      Control de potenciaSistema de control de Pitch electrico


        Longitud de las palas63,7 m
        TipoGlass fiber-reinforced plastic (GFRP)
        Longitud maxima de cuerda4 m

          Sistema eléctrico

          Frecuencia nominal50 Hz
          GeneradorDouble-fed-induction generator
          Clase de protección del generadorIP 54
          Tipo de convertidorFrequency converter
          TransformadorITS / ETS

            Nivel de emisión de ruido

            Nivel máximo de emisión de ruido107 db (A)

              Curva de potencia

              Senvion Technology

              The 2.XM series combines time-tested technologies with innovative features to further increase reliability, efficiency and yields. The drivetrain combines a modular design with a 3-point suspension. The matching electrical system with a double-fed induction generator and partial converter is highly efficient and extremely reliable.

              Smart Power Mode

              With our tried-and-tested and modular technology, Smart Power Mode enables the optimization of the wind turbine without component changes. By evaluating the project conditions and adjusting operational parameters, the nominal power can be increased by 200 kW. This maximizes the output from 2.3 MW to 2.5 MW. A combination of both Smart Power Mode and standard operation mode can be implemented to allow the best possible output from each wind farm.

              Smart Power Mode
              Nominal Power2,500 kW

              • Temperature < 45°C
              • Wind and loading conditions evaluation
              • Grid compatibility
              Power Curve - Smart Power Mode 2.3M130
              Senvion 2.XM
              1. 1

                Generator/frequency converter

              2. 2

                Gear box

              3. 3

                Rotor blade

              4. 4

                Rotor hub

              5. 5

                Pitch system

              6. 6

                Rotor bearing and shaft

              7. 7


              8. 8

                Tubular steel towers


              Title File Size
              Technical specifications 2.3M130 PDF 300 KB
              Senvion - Portfolio Overview PDF 1.6 MB


              Senvion Chile S.p.A.
              Los Militares 5890, Floor 11th, Suite 1103
              Las Condes, Santiago · Chile